Product Overview
ATS Tactical is putting together their first Bundle package for our customers. We are putting together our three top selling items with a special price for all of our tactical customers. Here is the list of the items you will be receiving.
1. The ATS War Belt is a padded cover that is designed to be used with a belt system up to 2" in width. The inside of the War Belt is lined with a strip of 2" wide hard side (male) Velcro to interface with duty belt soft side (female) Velcro to keep the belt from shifting during hard use. It offers full length 1/4" high-density, closed cell foam padding for comfort and is lined with Dri-Lex moisture wicking material on the inside of the belt. There are 4 ITW/Nexus 1" Looplocs on the top edge of the belt for using the optional suspenders.
The outside cover of the War Belt is bar tacked with three stacked rows of PALS webbing for use with any MOLLE compatible pouches. The outer cover is opened along the bottom, allowing access to the duty belt within (belt not included). This allows the user to hang pouches, holsters, and drop-leg hangers that are not MOLLE compatible anywhere along the inner belt. The padded belt is sized to work with our ATS War Belt Liner Belt or Cobra Rigger's Belt (Large with Large, etc.). As with all our products the ATS War Belt is made in the USA and comes with a lifetime guarantee against defects in materials and workmanship.
Proper sizing for the War Belt will have each end of the War Belt ending just in front of your hip bones. The overall, end to end length measurements are Small: 30 inches, Med: 34 inches, Large: 38 ½ inches, Extra Large: 43 inches, XXL 47 inches
2. The ATS War Belt Insert Belt is a lightweight belt designed specifically to work in conjunction with our War Belt. It is constructed of a single piece of 2" Cordura webbing sandwiched between two layers of loop (female) Velcro and then stitched 5 times to give it some stiffness. The belt fastens in the front with an ITW Nexus 2" dual adjust side release buckle. They are designed to match up to the War Belt sizing (medium to medium, large to large, etc.).
(S) 30-36 (M) 34-40 (L) 29-45 (XL) 43-49
The War Belt Insert Belt is offered in Coyote Brown, Ranger Green, Foliage Green and Black. As with the rest of our product line, the ATS War Belt Insert Belt is made in the USA of the highest quality materials and are lifetime warranted against defects in materials and workmanship.
3. The SOF Bleeder pouch is removed from the MOLLE Panel by popping an ITW/Nexus side release buckle on the retaining strap, grabbing the horizontal tear away loop and pulling. Instead of a red handle, the handle on the Bleeder Pouch is color matched so that it doesn't create a visually distinctive mark. It is held secure to the body of the pouch when not in use by Velcro.
When opened, the body side of the pouch has two vertical loops of one inch Elastic, while the face side of the pouch has a vertical loop and two horizontal loops, also of one inch Elastic. The pouch is closed by a #8 YKK zipper with 550 Paracord zipper pulls.
Owing to its 500D Cordura construction, the Bleeder Pouch Rip Away weighs just 6 3/8 ounces. The pouch measures about 6 1/4 inches wide, about 4 1/2 inches tall, and about 4 1/2 inches deep.
