Product Overview
Aegis was the name of Zeus's shield, making it an appropriate name for a plate carrier. Unlike Zeus's shield, the ATS Aegis plate carrier is a scalable system that allows for application to many different mission sets.
The Aegis is sized on small, medium, large and XL ESAPI plates, as well as the 10X12 inch plate common to law enforcement. The plate pockets are made so that they can take straight, curved, or multi-curved plates, and are held closed by heavy duty Velcro on the plate pocket flap. The back side of the pocket that rests against the wearer has a thin closed cell foam pad under a layer of Aero Spacer wicking material. Adjustable two inch webbing with removable shoulder pads make up the upper suspension system.
The upper chest area of the Aegis has PALS webbing over Velcro, with Velcro sewn to the PALS webbing for attaching MOLLE compatible pouches like the ATS Combat Leader Admin Pouch, but also provides an attachment point for Law Enforcement identifier placards. There are four channels and three rows of MOLLE space on the upper section, with an additional six channels and three rows of MOLLE on the front flap. The lower two rows of PALS webbing are also covered with soft side Velcro to interface with the back side Velcro of the ATS Slimline Modular Chest Harnesses. There are also two ITW/Nexus Quick Attach Surface Mount buckles to interface with the Slimline Modular Chest Harnesses.
The back panel of the Aegis features a box-X stitched drag handle with one row of four channels of PALS at the top of the carrier, followed by 5 rows and 6 channels of PALS. There is a 6 inch tall and 9½ inch wide grid of soft side Velcro to attach identifier placards to.
The Aegis V2 comes with the military version cummerbund that can accept side plates up to 6X6 inches. The cummerbund has three rows of PALS webbing for attaching any MOLLE compatible pouches or accessories. There is an optional Hybrid cummerbund, available separately, that can be used with the system, and the ATS Chest Harness Adapter Kit that allows the integration of the ATS Slimline Chest Harness with the use of four ITW/Nexus QASM buckles.
The Aegis Plate Carrier is made in the USA in the ATS factory in Hopkinsville, KY, using only the finest quality Mil Spec, Berry Amendment compliant materials. Its covered by our lifetime warranty against defects in manufacturing and workmanship.
https://youtube.com/shorts/pZQpo52rz5w?si=QeIvvaCzOT7HRQDO
